Ames Environmental: Learning Center - Collect a Sample for Asbestos Testing

Does not need to be larger then the size of a quarter
Each individual sample (approximately the size of a quarter) needs to be put into a separate sealable container (plastic baggies work well)

Each sample needs to be labeled correctly so that we can reference it on your report.

Thoroughly completing the chain of custody form will insure a detailed lab report.

Ames Environmental Inc.
410 Main Street
Slater, IA 50244

It is a good idea to use water when taking any samples because there might be asbestos fibers in it.
Each sample must be sealed in a properly labeled plastic baggies to prevent cross contamination.
Payment will be required prior to the release of the lab report.
Taking your own samples can increase your liability, generate inaccurate results, and lead to costly fines from state and local governments (due to incorrect sampling practices). We strongly recommend that all samples taken in anything other than a residential (single family, owner occupied home) setting are done either through our Asbestos Building Inspection service or by an in house (member of your staff), accredited, and knowledge, building inspector.
These instructions are used for our Asbestos testing only service.